Mamiya C330f Professional Reparaturanleitung Seite 51

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 54
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 50
Mamiya TLR Summary 51
15 Glossary
15.0 General medium format terms and acronyms
I will add to this list as I come across terms that may not be self-explanatory. It isn’t intended to be definitive.
Coating A layer applied to lens glass surfaces to alter their
refractive characteristics. Multi-coating uses more than one
coating to correct for different behaviour by different
wavelengths (colours) of light.
Parallax The different image content that results from slightly
different viewpoints. What you see isn’t exactly what you
get.
Pentaprism A five-sided prism (obviously!) that provides an eye-level,
right-way up, left to right correct view of the subject.
Taking lens In a twin lens reflex camera, the lower lens used to expose
the film.
Viewing lens In a twin lens reflex camera, the upper lens that is used for
composition and focusing..
WLF Waist-level finder. The basic ‘flip-up and look down’
finder type. Consists of a folding light shield around the
camera focussing screen. Image is right-way up, but left to
right reversed.
15.1 Mamiya TLR specific terms
Paramender Mamiya device to move the camera at right angles to the
lens axis and parallel to the lens board by 50mm (2”). This
moves the taking lens to the viewing lens position to
correct parallax at close distance.
Porrofinder A finder that uses mirrors to achieve a right-way up, left to
right correct eye level image. Similar in effect to a
pentaprism.
Rack and pinion A gearing mechanism that uses a toothed bar or track in
conjunction with a toothed roller at right angles to the bar.
16 Common Problems
16.0 Introduction
Most of the content of this section can be found spread throughout the rest of this document. This section is intended to be a
combination of quick reference and pointer to more details.
16.1 Shutter release problems
The shutter will not release unless the bellows is fully in (or out).
This may mean that the internal light baffle is raised (the camera control is in the ‘unlock’ position). This is a camera
interlock feature that is not normally by-passed.
The shutter will not release.
There are several possible causes. On some cameras the multi-exposure interlock trips before the shutter. So if you start
to press the release and change your mind the camera body can be fooled into thinking that you have released the shutter.
This behaviour varies between bodies. Use the Multi exposure setting to use the release, then reset to Single exposure
Seitenansicht 50
1 2 ... 46 47 48 49 50 51 52 53 54

Kommentare zu diesen Handbüchern

Keine Kommentare